Common problems in bottle blowing process of bottle blowing machine

With the development of the domestic plastic bottle blowing machine market, the plastic bottle blowing machine has also been developed. It is widely used in the beverage, cosmetics and food industries, and has attracted more and more businesses to choose the bottle blowing machine to replace the previous bottle making tools. But we will also encounter some problems in the process of using the bottle blowing machine. Now let's understand what problems we will encounter!

The bottle blowing machine often jams the feeding tray when feeding:

1. Such a situation is a headache. From experience, once the preform (embryo) is long and the cutting weight is large, this phenomenon is relatively rare.

2. Increase the material level but do not feed: this requires several conditions to be checked: there is no material in the hopper, and if there is no material, you need to add material as soon as possible; However, if not, it is necessary to check whether the control contactor of the hoist is powered on. Once the elevator is powered on, check whether the motor is powered on and loaded. The reason is that there is a big reason for this condition. It seems that the bottle blank is stuck to the lifting belt. At this time, the simple way is to manually help lift. When checking that the control contactor of the elevator is not powered on at the beginning, please check whether the electric eye of the bottle blank is not in the same line with the reflector.

3. Is there any dislocation where the bottle often pinches the manipulator.

4. The bottle cannot be taken out of the mold after blowing.

The above are some common problems encountered by the bottle blowing opportunity. I hope that similar problems can help you after reading them! If you have other questions or need to buy a bottle blowing machine, you can leave a message to contact us, thank you!