You are here:
What are the common problems in using the bottle blowing machine?

What are the common problems in using the bottle blowing machine?

2023-01-14 21:53

For plastic molding machine manufacturers, there will be a variety of problems when using bottle blowing. So today we will make a summary of these problems to see what bad phenomena occur in bottle blowing opportunities, the reasons for these phenomena, and how to deal with them.


1、 Bad shape of bottle:


A. The temperature of the whole preform is too low. In this case, raise the temperature of the preform.

B. The air inlet and outlet of the blow mold cavity is poor. Check whether the air inlet and outlet are blocked.

C. The pressure of blowing air is not enough. Check the pressure of blowing air

D. The capacity of blow molding air is not enough. Check the supply circuit of blow molding air.


2、 The bottle surface has wrinkles:


A. The time of one blow molding is too late, and the temperature of the preform relative to this part is too low. Turn up the blow molding timer once.

B. The temperature of the preform is uneven. Please raise the temperature of this heater.

C. The thickness of the preform is uneven. Check the preform.


3、 The bottle preform is bent and deformed when the bottle blowing machine is heated:


A. The rotation of the preform during heating is incorrect. Confirm whether there is collision on the reflector.

B. Local overheating of bottle preform. Adjust the output of the heater section.

C. The preform is slightly hot. Check the preform.


The common problems of the bottle blowing machine will be introduced here today. If you have other problems, please feel free to contact us. Thank you!


plastic molding machine manufacturers