During the processing of the full-automatic bottle blowing machine, some temperature control should be paid attention to to ensure the production of suitable plastic bottles.
1. Melting temperature TM: for crystalline polymers, it refers to the temperature at which the three-dimensional remote ordered state of macromolecular chain structure changes into disordered viscous flow state, also known as melting point. This is the lower limit of processing temperature of crystalline polymer molding.
2. Glass transition temperature TG: refers to the transition temperature of amorphous polymer (including amorphous part of crystalline polymer) from glass state to high elastic state or from the latter to the former. This is the lowest temperature for the free movement of the chain segment of the amorphous polymer, and also the upper limit of the product working temperature.
3. Non-flow temperature: the maximum temperature of non-flow under a certain pressure. Full-automatic bottle blowing machine is to add a certain amount of plastic into the barrel at the upper end of the capillary rheometer die, heat it to a certain temperature, and then apply a constant pressure of 50MPA after the constant temperature is known to be a new 10MIN. If the material does not flow out of the die, increase the temperature of the material by 10 degrees after pressure relief, and then apply a constant pressure of the same size after holding it for 10 minutes, and then continue until the melt flows out of the die, and reduce the temperature by 10 degrees to make it the non-flowing temperature of the material.
4. Flow temperature TF: refers to the temperature at which the amorphous polymer changes from a highly elastic state to a viscous flow state. It is the lower limit of processing temperature of amorphous plastics.
5. Decomposition temperature TD: refers to the decomposition temperature of the polymer when the temperature increases further under the viscous flow state, which will aggravate the degradation of the molecular chain.
The function of the bottle blowing machine is not only to blow out all kinds of bottles, but also to learn to adjust the parameters of the machine and control the temperature of the machine to blow out high-quality plastic bottles.
